Installing front brake pads (16-inch brake)

• If applicable, observe the identification of the removed brake pads.

  If the brake pads are worn on one side, they must not be mixed up.

• Install the brake pads (1) into the brake caliper in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the special tool (cable tie) 2 413 317  .
• Install the brake caliper (3).
• Replace screws.

  Parts:  screw

• Tighten the screws (1), if applicable, hold against the hexagon head (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Guide bolt (brake caliper on brake anchor plate)
  M8 Replace screws.	Tightening torque	35 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the front brake pad wear SENSOR .
• Install the front left and right WHEELS .
• COMMISSION/BED (BREAK) IN new brake pads and brake discs.