Installing The Front Door
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
- Attach door from above.
- Secure door against closing.
- Connect the connector and press the lock (1) down,
- Tighten screw (2) at door stop.TIGHTENING TORQUES SPECIFICATION
Door stop to pillar screw Tightening torque 28 Nm - Tighten screws (1) between both hinge elements at top and bottom.TIGHTENING TORQUES SPECIFICATION
Screw connection, hinge parts screw Tightening torque 27 Nm
Follow-up work
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .