Install The Rear Quarter Panel On The Right

• Install reinforcement plate (1) and attach through welding.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pre-clean bonding surfaces of reinforcement plate (1) and the body with cleaning agent R2.
  CONSUMABLE DESCRIPTION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean the bonding surfaces of the reinforcement plate (1) and the body using R1 solvent cleaner.
  CONSUMABLE DESCRIPTION
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

  Courtesy of BMW OF NORTH AMERICA, INC.

• Apply K5 adhesive to the reinforcement plate (1).
  ADHESIVE
  
  

  Body adhesive K5

  50 ml

  83192158654

  ADHESIVE
  
  

  Body adhesive K5

  195 ml

  83195A59935

• Install reinforcement plate (1).
• Pre-clean bonding surfaces of reinforcement plate (1) and the body with cleaning agent R2.
  CONSUMABLE DESCRIPTION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean the bonding surfaces of the reinforcement plate (1) and the body using R1 solvent cleaner.
  CONSUMABLE DESCRIPTION
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

  Courtesy of BMW OF NORTH AMERICA, INC.

• Apply K5 adhesive to the reinforcement plate (1).
  ADHESIVE
  
  

  Body adhesive K5

  50 ml

  83192158654

  ADHESIVE
  
  

  Body adhesive K5

  195 ml

  83195A59935

• Install reinforcement plate (1).
• Pre-clean bonding surfaces (1) on vehicle and on new part with cleaning agent R2.
• Clean bonding surfaces (1) on vehicle and on new part with cleaning agent R1.
• Apply adhesive K5 to the bonding surface (1).
  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00... INSTALLING CAVITY SEALING (EXPANDED) (X3) .
• Apply sealant D1 to the cavity sealing elements (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE DESCRIPTION
  
  

  Sealant D1 (seam sealing)

  310 ml

  83422409985

• Install the side panel with the help of a second person.

  During installation, ensure that sufficient adhesive has been applied to all bonding surfaces.

• Align the side wall in the areas of the separating cuts and secure it with locking pliers.
• Tighten the nuts on the reinforcement plate.
  CONSUMABLE DESCRIPTION
  
  

  Plastic nut

  ø18 mm

  51161943122

  CONSUMABLE DESCRIPTION
  
  

  Plastic nut

  ø22 mm

  07147169847

• Rivet the side panel in area (1) with blind rivets N3.
  CONSUMABLE DESCRIPTION
  
  

  Blind rivet N3	83190301421
  Ø 4 mm; clamping area 1-3 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach separating cut (1) and reinforcement plate (2) through welding.

  Only weld the separating cut and reinforcement plate after installation of the punch rivet.

  Courtesy of BMW OF NORTH AMERICA, INC.

• N5 Rivet the side panel in the area (1) up to (6) with punching rivets N4.

  Area	Description	Number
  1	N4	8
  2	N4	12
  3	N5	3
  4	N5	6
  5	N4	3
  6	N4	10
  7	N4	3

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE DESCRIPTION
  
  

  Punch rivet N4	83192457307
  Ø 3 mm; 4 mm long

  CONSUMABLE DESCRIPTION
  
  

  Punch rivet N5	83192158079
  Ø 5 mm; 5 mm long

• Rivet side panel in area (1) with 11 punch rivets N4.
  CONSUMABLE DESCRIPTION
  
  

  Punch rivet N4	83192457307
  Ø 3 mm; 4 mm long

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the EMC screw 

• Drill the hole with a diameter of 4.2 mm after the adhesive completely hardens.
• Screw in the EMC screw.
• Seal the EMC screw with the sealant.
  CONSUMABLE DESCRIPTION
  
  

  Sealant D1 (seam sealing)

  310 ml

  83422409985

• Install 3 EMC screws in the area (1) after the adhesive has hardened.
• Install 1 additional EMC screw in the area of the door sill.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ACTIVATE HIGH-VOLTAGE SYSTEM .
• Refer to INSTALLING THE FLAP IN THE RIGHT LUGGAGE COMPARTMENT TRIM PANEL .