Removing the cover on the rear bumper cover
Preliminary work
- Remove the left flap in the luggage compartment TRIM PANEL .
- Remove right flap in luggage compartment TRIM PANEL .
- Remove both tail lights from the SIDE PANEL .
- Remove left and right REAR REFLECTORS .
- Remove rear BUMPER PANEL .
NOTE:
Perform the steps on the right and left side.
- Unlock the detents (1).
- Remove the ultrasonic sensor (2) and let it hang from the wiring harness.
- Release the cover (1) along the dotted line on the detents (2) and remove it.