Replace bumper cover, front

Preliminary work 

• Remove front ORNAMENTAL GRILLE .
• Partially remove both front wheel ARCH TRIMS .
• Partly remove the front sections of both front wheel ARCH COVERS .
• Remove front bumper COVER .
• Remove the front bumper cover ORNAMENTAL GRILLE .
• Remove the left and right AIR INLET LID .
• Remove the front bumper cover, COVER .
• Remove the left and right bumper cover REINFORCEMENT .
• Remove left and right side TRIM .

• Loosen screw (1).
• Release bumper bracket (2) from clips (3) and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the bumper cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the left and right side.
• Clip the bumper bracket (2) into the detents (3).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install left and right side TRIM .
• Install the reinforcement on the left and right bumper COVER .
• Install the front bumper cover COVER .
• Install the left and right AIR INLET LID .
• Install the front bumper cover ORNAMENTAL GRILLE .
• Install front bumper COVER .
• Partly install the front sections of both front wheel ARCH COVERS .
• Partially install both front wheel ARCH TRIMS .
• Install front ORNAMENTAL GRILLE .