51 11 Bumper, Front
51 11 TIGHTENING TORQUE OVERVIEW
| Bottom bumper bracket on the front subframe. | ||
| M8x100 Replace screws. | Tightening torque | 19 Nm |
| Bottom support on front axle support adapter | ||
| M8x75 screw | Tightening torque | 19 Nm |
| Bumper cover on side wall | ||
| Screw | Tightening torque | 3 Nm |
| Cover panel on vertical connection | ||
| Hexagon screw | Tightening torque | 4 Nm |
| Front bumper bracket to engine mount | ||
| Hexagon screw with flange Replace screw | Tightening torque Angle of rotation |
100 Nm 180° |
| Guide to the side on fog light holder | ||
| Tightening torque | 3 Nm | |
| License plate baseplate | ||
| Screw TS 5x16 | Tightening torque | 0.7 Nm |
| Support for the bottom bumper panel on the deformation element | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Support on vertical connection | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Support to support | ||
| Hexagon screw M6x20 | Tightening torque | 8 Nm |
| Z support to support | ||
| Tightening torque | 8 Nm | |