Install the stiffening plate
- Insert the thrust field (3) on the covers of the steering assembly (2) and position.
- Replace the bolts (arrows).
Parts: Screws
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
| Thrust field to front axle support | ||
| M8 Replace screws. | Joining torque Angle of rotation |
25 Nm 70° |
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Underbody protection | ||
| screw | Tightening torque | 3 Nm |
Follow-up work
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .