Installing control unit holder for cylinders 1 to 4

• Insert and position control unit holder (1) with the control units.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure that the centering pins (2) are located in the rubber mounts (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the cable bracket (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the wires and connectors (1) to the adapter plate.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

• Engage the cable bracket (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Installing the cover panel of the master DME control unit.

  Courtesy of BMW OF NORTH AMERICA, INC.

  • Position the cover of the master DME control unit (1)
  • Engage the cover panel of the master DME control unit (1) downwards with the clamps (2) and the guide pins (3) in the carrier plate of the DME.
• Refer to CONNECTING BATTERY GROUND LEAD .