Removing and installing/replacing rear center console cover (M4 Coupe, M4 Convertible)

Special tools required: 

• 00 9 325

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Press special tool 00 9 325 between center console (1) and cover (2).

Unclip cover (2) towards rear.

If necessary, unlock associated plug connections and disconnect.

Remove cover (2).

Installation note: 

Latches on cover and counterparts on center console must not be missing or damaged.

Replacement (depending on version): 

• MODIFY FRESH AIR GRILLE IN REAR PASSENGER COMPARTMENT (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

• Modify 12 V CHARGING SOCKET (2)
• Modify switch (3)

Courtesy of BMW OF NORTH AMERICA, INC.