Installing the rubber window seal for the front door

• Check the seal (1) for damage and correct fit; replace it if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check acoustic foam parts (1), (2) and (3) for damage and correct fit; replace it if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in rubber window seal (1) together with the top trim strip (2) on the door frame.
• Mount the rubber window seal (1) on the trim strip (2).
• Treat the rubber window seal (1) with a suitable lubricant.
• Install the front and rear rubber window seals (1) in the window guide.
• Make sure the rubber window seal (1) is seated correctly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE WINDOW FRAME TRIM OF THE FRONT DOOR  .
• Refer to INSTALLING THE COVER ON THE INSIDE OF THE WINDOW FRAME .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE DOOR TRIM PANEL .
• Refer to INSTALLING THE OUTSIDE REARVIEW MIRROR .
• Refer to INSTALLING THE MIRROR TRIANGLE COVER .
• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE WEATHER STRIP ON THE FRONT DOOR .