Remove the center console trim
Precondition
- With equipment specification with rear console:
- Remove rear panel
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to REMOVING THE REAR CENTER CONSOLE TRIM .
- Refer to REMOVING THE REAR STORAGE COMPARTMENT/DVD PLAYER .
- Refer to REMOVING THE FRONT STORAGE COMPARTMENT .
- Refer to REMOVING THE TRIM PANEL FOR PEDAL ASSEMBLY .
- Refer to REMOVING FOOTWELL TRIM PANEL ON THE RIGHT .
- Refer to REMOVING THE CENTER STACK TRIM .
- Refer to REMOVING THE CENTER CONSOLE .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Attach protective film (1)
to gear selector switch (GWS).CONSUMABLE SPECIFICATION
Protective cover
"Vehicle protection" picture panel8319 2 350 087 - Unclip the center console trim (1) upwards with the special tool 0 496 569 (00 9 325) .
- Turn the center console trim (1) towards the side and remove it via the gear selector switch (GWS) (2) .
- Unlock all plug connections and disconnect.
- Remove center console trim (1) .