Remove the flat motor for the rear power windows

Preliminary work 

• Refer to PARTIALLY REMOVING THE FRAME TRIM FROM THE WINDOW FRAME OF THE REAR DOOR .
• Refer to REMOVING THE DECORATIVE STRIP FROM THE REAR DOOR TRIM PANEL  .
• Refer to REMOVING REAR DOOR TRIM .
• Refer to REMOVING THE MID-RANGE SPEAKER IN THE REAR DOOR .
• Refer to REMOVING MODULE BRACKET ON THE REAR DOOR .

• Loosen screws (1).
• Remove the holder (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lift fleece (1) as shown.
• Unlock plug connection (2) and disconnect.
• Loosen screws (3).
• Remove the flat motor (4).

Courtesy of BMW OF NORTH AMERICA, INC.