Install speaker trim panel at rear
- Install speaker trim (1).
- Mark all welding pins (2).
- Remove speaker trim (1).
- Cut off all marked welding pins above the marks plus dimension (A).TECHNICAL DATA SPECIFICATION
Shorten the welding pins of the speaker trim Dimension A 2 mm - Install speaker trim (1) and engage in the detents (2).
- Install speaker trim (1).
- Bond welding pins in the marked area with the adhesive from the adhesive set.
ADHESIVE DESCRIPTION
| Adhesive set K6 | 11 g, Loctite 3090 | 83195A547C4 |
| 10 g, Loctite SF 770 | ||
| 2, Mixing tube |