Install the center console
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Install the center console (1) , feeding in the wiring harness while doing this.
- Feed in the center console (1)
at the dashboard and correctly position it.
- Fasten the wiring harness on the center console (1)
and connect and lock any plug connections that are there.
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATION
| Center console on tunnel | ||
|---|---|---|
| Hexagon screw M6x18 |
Tightening torque | 4.6 Nm |
- Tighten down screws (2) .
TIGHTENING TORQUE SPECIFICATION
| Center console at the dashboard | ||
|---|---|---|
| Oval-head screw | Tightening torque | 1.8 Nm |
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATION
| Center console on tunnel | ||
|---|---|---|
| Hexagon screw M6x18 |
Tightening torque | 4.6 Nm |
Follow-up work
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
- Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
- Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
- Refer to INSTALLING THE DECORATIVE TRIM ON THE LEFT AND RIGHT OF THE CENTER CONSOLE .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING TRIM IN STORAGE COMPARTMENT OF CENTER ARMREST .
- Refer to INSTALL THE CUP HOLDER .