Install reinforcement strut

• Install the reinforcement strut (2)  .
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Reinforcement strut on bumper cover support
  Hexagon screw	Tightening torque	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the support (2)  .
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Strut on front end
  Hexagon screw	Tightening torque	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSERT TOP AUTOMATIC AIR FLAP CONTROL .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
• Refer to INSTALLING CENTER RADIATOR GRILLE .
• Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
• Refer to INSTALL THE FRONT HOOD SEAL .