Removing the trim of air duct
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING SEAL FOR FRONT HOOD .
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVE CENTER RADIATOR ORNAMENTAL GRILLE .
- Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
- Refer to REMOVE FRONT BUMPER COVER .
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Unclip the detents (1) .
- Feed out the air duct trim (2) from the front bumper.