72 12 006 Removing and installing/replacing airbag module for passenger knee protection
WARNING:
High-voltage system - danger to life!
The following points must be strictly observed prior to starting work:
Disconnect HIGH-VOLTAGE SYSTEM from power.
Observe SAFETY INFORMATION for handling electric vehicles.
The following points must be strictly observed prior to starting work:
Disconnect HIGH-VOLTAGE SYSTEM from power.
Observe SAFETY INFORMATION for handling electric vehicles.
WARNING:
Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Necessary preliminary tasks:
- Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT
- Remove CENTER DASHBOARD TRIM PANEL
Release screws (1).
Tightening torque 72 12 02AZ .
Airbag module (2) is coded against incorrect assembly.
Unfasten plug connection (1) AND DISCONNECT .