61 31 037 Removing and installing/replacing light operating facility
NOTE:
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
- Remove left fresh air grille
- Partially release bottom center dashboard trim panel
Unclip trim with light operating facility (1).
Unlock associated plug connection and disconnect.
Remove cover with lighting operating facility (1).
Replacement:
Release light operating facility (1) at latch mechanisms (2) and remove from trim (3).
Installation note:
Ensure correct latch mechanism of light operating facility (1) in trim (3).
Clamps on trim (3) must not be damaged or missing.