65 13 060 Removing and installing/replacing speaker (mid-range speaker, in instrument panel)

Special tools required:

Unclip trim (1) with special tool 00 9 327 from latch mechanisms and remove upwards.

Fig 1: Unclipping Trim With Special Tool (00 9 327)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs and clamps at marked points must not be damaged.

Fig 2: Locating Trim Retaining Lugs And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 65 13 04AZ .

Remove mid-range speaker (2) upwards from dashboard.

Disconnect plug connections underneath.

Remove mid-range speaker (2).

Fig 3: Identifying Mid-Range Speaker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.