51 16 063 Removing and installing/replacing interior mirror (overview)

IMPORTANT: Interior mirrors with modified mirror base will be installed as of series launch F20 and for all subsequent series launches.

Observe new REPAIR INSTRUCTIONS !

Further introduction date:

F01, F02, F03, F06, F07, F10, F11, F12, F13, F18	07/2012
F25	03/2012

Distinguishing feature:

previous version, small mirror base (1) with round base plate on windscreen.
new version, large mirror base (2) with square base plate on windscreen.

NOTE: Dismantling of mirror cap is identical on both versions.

Fig 1: Identifying Mirror Base

G08511421

Courtesy of BMW OF NORTH AMERICA, INC.

Version with mirror arm end cap:

Previous version.

Fig 2: Identifying Mirror Arm End Caps - Previous Version

G04749632

Courtesy of BMW OF NORTH AMERICA, INC.

Version with mirror arm end cap:

NEW VERSION .

Fig 3: Identifying Mirror Arm End Cap - New Version

G11146936

Courtesy of BMW OF NORTH AMERICA, INC.

Version with rain sensor:

Previous version.
NEW VERSION .

Fig 4: Identifying Rain Sensor

G04749633

Courtesy of BMW OF NORTH AMERICA, INC.

Version with Autobeam:

Previous version.
NEW VERSION .

Fig 5: Identifying Autobeam

G04749634

Courtesy of BMW OF NORTH AMERICA, INC.

Version with Toll interior mirror for Japan:

Previous version.
NEW VERSION .

Fig 6: Identifying Toll Mirror For Japan

G04749635

Courtesy of BMW OF NORTH AMERICA, INC.