41 61 001 Replacing Bonnet
WARNING:
High-voltage system - danger to life
If the engine compartment lid is damaged (e.g. due to an accident), other components that are not visible may also be damaged.
Perform the following work if it is suspected that there may be damage that is not visible:
- DISCONNECT HIGH-VOLTAGE SYSTEM FROM POWER .
- Observe SAFETY INFORMATION for handling electric vehicles.
Attention!
Removal and installation of the engine compartment lid must be carried out with the assistance of a second person.
NOTE:
Observe procedures for REPAIR STAGE 1 .
Removing the engine compartment lid
Unclip washer jets (1).
Release hose (2) from holders (5x).
Release clip (3) from engine compartment lid hinge and remove hose.
Unscrew nuts (1).
Remove bonnet.
Installing the engine compartment lid
Remount all mounted parts on new part.
Install engine compartment lid at screw locations to on hinge.
Tightening torque 41 61 1AZ .
If necessary, adjust ENGINE COMPARTMENT LID .