Removing and installing/replacing weather strip on inner front door (X6 M)

Necessary preliminary tasks: 

• Remove FRONT DOOR TRIM PANEL .

Lever out cover (1) at rear slightly.

Start at rear with removal of weather strip (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off weather strip (1) towards top.

Installation note: 

Replace faulty clamps (3).

Note that the first clamp differs from the others (3).

Insert weather strip (1) below cover (2) at front.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

If necessary, moisten weather strip (1) prior to installation with approved LUBRICANT .

Start with installation at front.

Courtesy of BMW OF NORTH AMERICA, INC.