Initializing parking brake (after manual unlocking of actuator unit) (X6 M)
IMPORTANT:
When the actuating unit is manually unlocked, the actual status of the parking brake may not correspond to the status indicated by the indicator lamp. Vehicle condition before initialization:
- Rectify fault.
- Vehicle stationary
- Ignition turned on
Press parking brake button with brake activated.
NOTE:
The indicator light in the display goes out as soon as the parking brake is operational again.
It is normal for noises to be heard.
Start-up can take several seconds.
It is normal for noises to be heard.
Start-up can take several seconds.