51 47 Floor-Trunk-Engine Compartment-Trim Panel (X6 M)
51 47 FLOOR TRIM, LUGGAGE COMPARTMENT AND ENGINE COMPARTMENT TRIM PANELS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Roller cover for luggage compartment frame to body | F07 | M8x22 | 17.5 Nm | |
| 2AZ Luggage compartment removable panel hinge on rear luggage compartment to body | F07 | 3.3 Nm | ||
| 3AZ Tail panel cover to transmission cross-member | F07 | 2 Nm | ||
| F15/F85/F86 | 3 Nm | |||
| 4AZ Screw connection, lashing eyes | F07/F11 | 6 Nm | ||
| F06/F12/F13 | 20.5 Nm | |||
| 5AZ Stud, rail cover | F07 | 6 Nm | ||
| 6AZ Screw connection, rail support | F07 | Replace screws | 8 Nm | |
| 7AZ Roller cover for luggage compartment lock to body | F07 | Replace screws | 8 Nm | |
| 8AZ Screen trim, center | F07 | 1.8 Nm | ||
| 9AZ Lock/housing to roller cover for luggage compartment (center) | F07 | 2.3 Nm | ||
| 10AZ Lock to retaining bracket | F07 | 25 Nm | ||
| 11AZ Locking bracket to roller cover for luggage compartment (center) | F07 | 8 Nm | ||
| 12AZ Mounting, cargo cover, to frame, cargo cover | F07 | 12 Nm | ||
| 13AZ Screw connection, underbody protection | F03 | 19 Nm | ||
| 14AZ Load area net cover mounting | F11 | 2.5 Nm | ||
| 15AZ Lashing rail to body | F25/F26 | 12 Nm | ||
| F15/F16/F85/F86 | 20 Nm | |||
| 16AZ Mounting for roller cover | F25 | 7.6 Nm | ||
| F85/F86 | 8 Nm | |||
| 17AZ Battery cover to body | F15/F85/F86 | 3 Nm | ||
| 18AZ Shoulder to body | F15 | 3 Nm | ||
| F85/F86 | 6 Nm | |||
| 19AZ Trim panel, D-pillar bottom to body | F15/F85/F86 | 3 Nm | ||
| 20AZ Trim panel for luggage compartment floor on body | F15 | Flat-head screw M8x18 | 8.5 Nm | |
| Sheet metal screw ST 4.8x19 | 3 Nm |
51 47 TIGHTENING TORQUE OVERVIEW
| Shelf on body | ||
| Plastic nut | tightening torque | 3 Nm |
| Underbody protection, front | ||
| Screw not metric thread | tightening torque | 3 Nm |
| M6 screw | tightening torque | 8.8 Nm |
| Nut | tightening torque | 2.5 Nm |
| Underbody protection/underbody planking/heat insulation | ||
| Screw not metric thread | tightening torque | 3 Nm |
| Screw M6 | tightening torque | 8.8 Nm |
| Nut | tightening torque | 2.5 Nm |