61 31 342 Removing and installing/replacing the gear selector switch (GWS)

Necessary preliminary tasks:

Release screws (1).

Tightening torque 61 31 1AZ .

Installation note:

Insert gear selector switch (2) correctly in front and rear fixation of center console support (3).

Fig 1: Identifying Gear Selector Switch, Center Console Support And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Raise the gear selector switch (2).

Unlock connector (1) on gear selector switch (2) and disconnect.

Fig 2: Identifying Gear Selector Switch And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: