22 32 050 Replacing cross member for transmission mounting (N55 AWD)

Special tools required: 

• 00 2 030
• 23 4 050

Necessary preliminary tasks: 

• Remove rear UNDERBODY PROTECTION .
• Remove left UNDERBODY PANELLING .

Supporting transmission: 

Support gearbox with special tools 23 4 050, 00 2 030 .

Secure transmission to mounting with tensioning strap (1).

Tasks are described in GEARBOX HOLDER .

Release screws.

Tightening torque 22 32 11AZ .

Release screw (1).

Tightening torque 22 32 6AZ .

Remove cross member.