Removing and installing/replacing heat shield at bottom (S63T2) (X5 M)

Necessary preliminary work: 

• Remove EXHAUST TURBOCHARGER, RIGHT, CYLINDERS 1-4  or EXHAUST TURBOCHARGER, LEFT, CYLINDERS 5-8 .
• Remove EXHAUST MANIFOLD AT LEFT or RIGHT EXHAUST MANIFOLD .
• Remove ALTERNATOR .

Release screws (1).

Tightening torque 11 65 5AZ .

Remove heat shield (2) towards top.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 11 65 9AZ .

Remove heat shield (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.