Removing and installing/replacing top cover on tail panel (X5 M)

Necessary preliminary taste: 

• Remove STORAGE COMPARTMENT IN LUGGAGE COMPARTMENT ON RIGHT .
• Remove TRIMS ON D-PILLAR AT BOTTOM  on left/right.

Release screws (1).

Remove cover (2) towards top.

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip cover (1) for lashing eye on left and right.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2) inwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure edge protector (1) is correctly seated on trim panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.