Prepare the assembly jig
- Install and fasten special tool 0 495 196 (00 2 320) on special tool 0 495 187 (00 2 300).TIGHTENING TORQUES SPECIFICATION
Engine mounting bracket on assembly jig M14x95 Tightening torque 130 Nm - Position and fasten special tool 2 413 082 on the special tool 0 495 196 (00 2 320) as shown.TIGHTENING TORQUES SPECIFICATION
Engine mount to engine mounting bracket Hexagon screws from special tool set Tightening torque 105 Nm