41 00... Frame Alignment Control Body Dimensions

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Dimensions in mm.

Measurement tolerances:

≤ 1000 mm ± 1.5 mm
≥ 1000 mm ± 2.5 mm

The control points shown serve to check the body and the set of attachments.

The specified dimensions/measurements refer to the center point of the bore/screw.

Under Body View 1

Fig 1: Under Body Dimensions And Measurement Points (Under Body View 1)

G09947534

Courtesy of BMW OF NORTH AMERICA, INC.

Under Body View 2

Fig 2: Under Body Dimensions And Measurement Points (Under Body View 2)

G09947535

Courtesy of BMW OF NORTH AMERICA, INC.

Top View, Front End

Fig 3: Front Body Dimensions And Measurement Points (Top View, Front End)

G09947536

Courtesy of BMW OF NORTH AMERICA, INC.

The specified dimensions refer to removed assemblies.

View, B-pillar

G09947537

Courtesy of BMW OF NORTH AMERICA, INC.

Measurement a=1556 mm between screw-on points of door brakes.