LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (Functional Descriptions - F25 - Charging System, Anti-Theft, Body Electrical Systems) >> Charging System - Functional Description >> Simultaneous operation of accelerator and brake pedals (MSV70) >> Procedure

Simultaneous operation of accelerator and brake pedals (MSV70): Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

The accelerator pedal module may only be replaced if there is an express customer complaint regarding increased, constant idle speed and/or a mechanically jamming accelerator pedal as well as the fault entry.

The fault entry alone does not require component replacement!

In the case of a multiple fault entry, the customer is to be informed of his or her possible incorrect operation (simultaneously operating the accelerator and brake pedals).