Notes for Service department: Preconditions
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
The following prerequisites must be met to ensure initialization can be carried out correctly:
- Vehicle stationary.
- Adequate battery voltage present, connect charger is necessary.
- Terminal 15 switched on.
- All doors closed.
The initialization can be carried out using the power window switch in each door or the corresponding power window switch in the switch block in the driver's door.