LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (Functional Descriptions - F25 - Charging System, Anti-Theft, Body Electrical Systems) >> Body Electrical System - Functional Description >> Instrument panel >> Brief component description >> Washer fluid level switch

Washer fluid level switch

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

The washer fluid level switch sends a signal when the washer fluid level is too low. The information appears in the TFT display in the form of a Check Control message. The washer fluid level switch is connected to the Junction Box Electronics (JBE). The signal is transmitted to the instrument cluster on the K-CAN2.

NOTE: As of F15, a washer fluid level sensor is installed (no reed contact). The washer fluid level sensor sends its signal to the Body Domain Controller (BDC).
scientia non olet · About LEMON Manuals