Initialization with the switch
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Carry out initialization with the switch as follows:
- Press the switch in the "Raise" direction and maintain pressure.
- Continue to maintain pressure on the switch after the sunroof reaches the end of its upward travel range. The initialization process starts after roughly 20 - 30 seconds.
- The floating headliner is opened (panorama glass roof). The tilt sunroof is raised and lowered and then lowered and closed. The floating headliner (panorama glass roof) is closed.
- The initialization process is terminated once the tilt sunroof and the floating headliner (panorama glass roof) are fully closed.
Pressure must be maintained on the switch for the entire duration of the initialization process!