Failure of the component
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
In the event of a communication failure to the convertible top module (CVM), carry out the standard checks (global procedure). If there is an internal control unit fault, the following behavior is to be expected:
- Fault entry in the convertible top module (CVM)
- Check Control message in the instrument panel
After replacement, the convertible top module (CVM) must be re-encoded and re-initialized.
We can assume no liability for printing errors or inaccuracies in this information and reserve the right to introduce technical modifications at any time.