LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (Functional Descriptions - F25 - Charging System, Anti-Theft, Body Electrical Systems) >> Body Electrical System - Functional Description >> Contact-free tailgate opening >> Functional networking

Functional networking

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

The following graphic shows the functional networking for contact-free tailgate opening.

Fig 1: Junction Box Electronics - Circuit Diagram
G09908759Courtesy of BMW OF NORTH AMERICA, INC.

Example F11

Item Explanation
1 Footwell module (FRM)
2 Junction Box Electronics (JBE)
3 Power distribution box
4 Automatic operation of tailgate (HKL)
5 Evaluation electronics, contact-free tailgate opening
6 Lower sensor, contact-free tailgate opening
7 Upper sensor, contact-free tailgate opening
8 Bumper aerial
9 Tailgate/tailgate lock
10 Rear window locking
11 Car access system (CAS)
Fig 2: Front Electronic Module - Circuit Diagram
G09908760Courtesy of BMW OF NORTH AMERICA, INC.

Example F30

Item Explanation
1 Front Electronic Module (FEM)
2 Power distribution box, right rear
3 Rear electronic module
4 Automatic operation of tailgate (HKL)
5 Evaluation electronics, contact-free tailgate opening
6 Lower sensor, contact-free tailgate opening
7 Upper sensor, contact-free tailgate opening
8 Bumper aerial
9 Tailgate/tailgate lock