Procedure for measuring resistance with body CAN, powertrain CAN, and suspension CAN terminating resistor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Inspection procedure for resistance test:
- The CAN bus must be de-energized.
- No other testing equipment must be in use (connected in parallel).
- The measurement is taken between the CAN Low and CAN High lines.
- The actual values may differ from the setpoint values by a few ohms.