84 31 020 Removing and installing/replacing hands-free system speaker (emergency loudspeaker)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim panel for pedal mechanism . See 51 45 184 REMOVING AND INSTALLING/REPLACING TRIM PANEL FOR PEDAL ASSEMBLY (ECE ONLY) , 51 45 184 REMOVING AND INSTALLING/REPLACING TRIM PANEL FOR PEDAL ASSEMBLY (US ONLY) or 51 45 195 REMOVING AND INSTALLING/REPLACING INSTRUMENT PANEL TRIM, BOTTOM RIGHT .

Disconnect connector (1).

If necessary, loosen cable straps from latch mechanisms (2).

Unlock latch mechanisms (2).

Remove speaker (3) from bracket.

Installation note:

Latch mechanisms (2) must not be damaged.

Fig 1: Identifying Plug Connection, Catches And Speaker

Courtesy of BMW OF NORTH AMERICA, INC.

Guide lugs of the bracket must be positioned in the corresponding grooves of the speaker (3).

Speaker (3) must audibly engage in the bracket.