62 30 005 Removing and installing/replacing trim for Head-Up Display

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Lever out trim for Head-Up Display (1) with special tool 00 9 317 at mounting points (2).

Feed cover for head-up display (1) in direction of arrow out of instrument panel trim (3) and remove.

Fig 1: Removing Trim For Head-Up Display With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure retaining lugs (1) and (2) and sleeve (3) of cover for Head-Up Display (4) are correctly seated.

Fig 2: Identifying Retaining Lugs And Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Only on F06, F12, F13:

Installation note:

Make sure retaining lugs (1) and (2) are correctly seated on cover for Head-Up Display (3).

Fig 3: Identifying Retaining Lugs On Cover For Head-Up Display

Courtesy of BMW OF NORTH AMERICA, INC.