63 17 255 Removing and installing/replacing right fog light (LED technology)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Follow notes for HANDLING BULBS/LIGHT SOURCES (EXTERIOR LIGHTS) .
NOTE:
The time value of this job item does not include adjustment of the fog lights!
Necessary preliminary work:
Removal:
Slacken both screws (1).
Remove fog light (2) in direction of arrow from bumper panel (3).
Installation:
Insert fog light (2) in direction of arrow into bumper panel (3).
Tighten both screws (1).
Tightening torque 63 17 1AZ .
Replacement:
On replacement of fog light or bumper panel at front:
Required follow-up work: