51 23... Adjusting/replacing bump stops (Version 3)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove luggage compartment wheel arch panel . See 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH PANEL or 51 47 161 REMOVING AND INSTALLING/REPLACING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL .

Following parts must not be damaged:

(1) Bump stop
(2) Lock nut (following illustration)

Fig 1: Identifying Bump Stop
Courtesy of BMW OF NORTH AMERICA, INC.

General view of rear side:

Adjust stop pads
Remove cap (1).

Adjust stop pad to correct height by turning screw (2) to left or right.
Remove stop pads
Release nut (3) and remove stop pads.

Fig 2: Identifying Bump Stop, Cap, Screw And Nut
Courtesy of BMW OF NORTH AMERICA, INC.