LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Body Equipment - Repair) >> Trim, Covers, Handle Trim >> 51 13 280 Removing and installing/replacing trim strip on roof frame at left or right

51 13 280 Removing and installing/replacing trim strip on roof frame at left or right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Graphics are similar.

Lever out trim strip (1) with special tool 00 9 321 starting at the front.

Unclip trim strip (1) in direction of arrow.

Fig 1: Removing Trim Strip Using Special Tool (00 9 321)
G04788425Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Latch mechanisms (1) of clips (2) must not be damaged.

If necessary, replace the clips (2).

Emergency strategy if T-bolt is broken: 

CLIP REPAIR FOR ROOF STRIP .

Fig 2: Identifying Roof Clips
G04791452Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Place front trim strip (2) against seal (1).

Trim strip (2) must be flush with edge (3) at rear.

Clip trim strip (2) into place completely.

Fig 3: Placing Front Trim Strip
G04788428Courtesy of BMW OF NORTH AMERICA, INC.