51 12... Retrofitting cover of rear bumper trim (X-Line)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR BUMPER TRIM

Drill out marks (1) on inside of bumper trim (3) with drill and hole cutter (2).

Fig 1: Drilling Bumper Trim Hole

Courtesy of BMW OF NORTH AMERICA, INC.

Insert cover (1) into bumper trim (2).

Secure retaining lugs (3) on inside of bumper trim with clamps (4).

Fig 2: Identifying Bumper Trim And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.