51 12... Removing and installing/replacing rear bumper panel cover (X-Line)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BOTTOM COVER

Release clamps (1) on inside of bumper panel and remove cover (2).

Fig 1: Identifying Bumper Panel Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining tabs (2) and retaining lugs (1) may not be damaged or missing.

Fig 2: Identifying Bumper Panel Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Secure retaining lugs (1) on inside of bumper panel (3) with clamps (2) and secure.

If necessary, replace retainers (2).

Fig 3: Identifying Bumper Panel Clamps And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.