51 16 216 Removing and installing (replacing) rear (lower) storage compartment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

NOTE: Retaining tabs (1) will be loosened during the next work step.

Unclip the rear lower storage compartment (3) at top (2).

Fig 1: Identifying Rear Lower Storage Compartment Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully fold the rear lower storage compartment (2) back until a screwdriver can be inserted between the retaining tab (1) and housing wall (3).

Carefully lever to unlatch the retaining tabs (1) toward the inside.

If necessary, unlock existing plug connections and disconnect.

Detach bottom rear of storage compartment (3).

Fig 2: Detaching Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining tabs (1) and lugs on the entire periphery (3) at the bottom rear of storage compartment (2) must neither be missing nor damaged.

Replacement

Modify insert mat
Modify rear cover

Fig 3: Identifying Storage Compartment Tabs
Courtesy of BMW OF NORTH AMERICA, INC.