51 21... Replacing inside door opener on left or right front door

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks:

Detach BOWDEN CABLE FOR INNER DOOR OPENER

NOTE: The graphic shows the left door trim panel.

If necessary, unclip and remove tweeter (4).

Release round weldings (1) with a Ø 12 mm drill.

Release long welding (2) with a box cutter.

Lever out inside door opener housing on door trim panel (3) and set down.

Fig 1: Identifying Door Trim Panel, Welding And Tweeter

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Fold long retaining clip (2) over inside housing tab of the door opener and press tight.

Secure door handle to door trim panel (3) by pressing down round retaining clips (1).

Reinstall tweeter (4).

Fig 2: Identifying Door Trim Panel, Retaining Clips And Tweeter

Courtesy of BMW OF NORTH AMERICA, INC.