LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Body Equipment - Repair) >> Front Bumper >> 51 11... Removing and installing/replacing cover for headlight washer unit on left

51 11... Removing and installing/replacing cover for headlight washer unit on left

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Pull out spray nozzle (1) by cover (2) slightly.

IMPORTANT: When releasing cover (2), grip spray nozzle (1) firmly and then allow to slide back slowly (risk of damage).

Release cover (2) from spray nozzle (1).

Installation: 

Retaining lugs (3) must not be damaged.

Fig 1: Identifying Headlight Washer Unit Spray Nozzle
G06911558Courtesy of BMW OF NORTH AMERICA, INC.