51 11 141 Removing and refitting/replacing bumper trim lower section
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front BUMPER PANEL
Release expanding rivets on left/right side of bumper panel lower section (2).
Release latch mechanisms (1) on rear of bumper panel.
Remove bumper panel lower section (2).
Installation note:
Replace expanding rivets.
Catches (1) must not be damaged or missing.
Replacement:
Remount SUPPORT FOR NUMBER PLATE .