51 11 050 Removing and installing/replacing support for front bumper trim

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove front BUMPER TRIM

Release screws (1) on left/right.

Tightening torque 51 11 4AZ

Remove support with shock absorber (2) by pulling forward.

Fig 1: Identifying Shock Absorber Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Adjust bracket (1) flush with support (2).

Fig 2: Identifying Bumper Trim Bracket And Support

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Reposition impact absorber.