LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Body Equipment - Repair) >> Floor-Luggage Compartment-Engine Compartment. Trim Panels >> 51 47... Removing and installing/replacing left or right capping in luggage compartment

51 47... Removing and installing/replacing left or right capping in luggage compartment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screw (1).

Installation note: 

Replace screw (1).

Tightening torque 72 11 21AZ .

End fitting is coded against incorrect installation.

Fig 1: Locating Luggage Compartment Screw
G09948607Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed capping (3) out of seat belt strap (2) and remove.

Fig 2: Identifying Seat Belt Strap, Capping And Screws
G09948608Courtesy of BMW OF NORTH AMERICA, INC.